Risco-group Agility 2-Way Wireless Keypad Manual de usuario descargar pdf

Agility 2-Way Wireless Keypad

INTRODUCTION

The 2-Way keypad is used to remotely program and operate the Agility security system. Being bi-directional the 2-Way keypad receives a reply status

indication from the panel for each command that it has sent to the panel. To use functions of the keypad you can use a code or a proximity tag.

MAIN FEATURES

 Bi-directional Wireless Communication

 Full wireless engineer programming

 Up to 3 Wireless keypads per system

 S.O.S / Two way communication emergency key

 Proximity tag operation

 Double tamper protection (Box & Wall)

 Battery economy mode

COMMUNICATION SETUP

The 2-Way keypad must identify itself to the system receiver. This can be done by using RF mode.

Setup using RF communication:

1. Set the receiver to Learn Mode by pressing the large button on the main unit for 10 seconds.

2. Send a Write message by pressing both keys

simultaneously for at least 2 seconds. The keypad will sound a confirmation beep and the

system will sound an allocation message.

3. If required to change the keypad's default settings configure the keypad's parameters according to the system installation manual.

Note :

Adding the keypad to the system can be done remotely using the configuration software by entering the serial number of the keypad.

MOUNTING THE KEYPAD

Mount the keypad on the wall using the supplied mounting bracket.

Note :

Before mounting the keypad test the keypad communication with the system.

1. Release the Mounting bracket captive screw (1).

2. Slide up the Main Unit (3) to release it from the two mounting bracket's locking tabs (2).

3. Mount the bracket.

Figure 1 Figure 2

4. Release the battery cover screw (1) and place the supplied 3 batteries.

1 2 3 4

1 Agility 2-Way Wireless Keypad INTRODUCTION The 2-Way keypad is used to remotely program and operate the Agility securit

2 Figure 3 5. Close the battery compartment and mount the keypad to the mounting bracket in a reverse sequence to th

3 Operation1 Quick Operation High Security ModeOutput control A/B/C2 Press button / / for 2 seconds Press button / / for 2 seconds followed by c

4 PRODUCT ORDERING INFORMATION P/N Description RW132KPPW31A Agility 2-Way Wireless Square LCD Keypad, 868MHz RTTE Compliance Statement Hereby, RISCO

Sin comentarios

Risco-group Agility 2-Way Wireless Keypad Manual de usuario